Description
A solid brass pull, machined — not moulded
This is a proper T-bar pull cut from solid brass bar: a rectangular, round-ended
grip standing on two stepped feet, each with a factory-tapped mounting hole. There is
no hollow back, no plated zinc, no paint that chips off in a year — the brass runs
all the way through, which is why a 400 mm pull weighs a full 357 g. The brushed
surface has that soft, low-glare champagne sheen that makes brass furniture hardware
look expensive on painted MDF, walnut, oak and shaker panels alike.
Why solid brass
- Solid brass, not plated — machined from brass bar; the colour is
the material itself, so it cannot peel or flake like a coated handle - Weight you can feel — 41 g (50 mm) up to 357 g (400 mm) per piece;
dense, wobble-free grip - Factory-tapped feet — two threaded holes ready for M4 machine
screws, no nuts needed - 8 sizes, one family — 50–400 mm so drawers and cabinet doors of
every size can all share the same hardware - Three finishes — brushed brass, matte black, antique bronze
- Simple fitting — two drilled holes per handle, screws from the
back of the panel
Three finishes
Brushed brass — the classic: softly brushed in line with the bar,
warm champagne gold. Matte black — electroplated over the brass, a
flat architectural black for two-tone kitchens. Antique bronze —
aged, dark-to-light rubbed finish for traditional and rustic pieces.
A finish that ages into something better
The brushed finish is unlacquered brass: it will slowly deepen into a warmer,
darker patina, especially where hands touch it — the look people pay antiques dealers
for. Prefer it bright? A wipe with brass cleaner brings the shine back. The black and
antique finishes are surface-treated and keep their colour as delivered.
How to choose your size — measure first, drill once
Pull length is measured overall, but fitting is decided by the hole spacing
(CC): measure the distance between the two screw holes of the size you pick
(from the table below), mark the panel, and drill two 4–5 mm holes. Screws pass from
the back of the board into the tapped feet. Always check your board
thickness before ordering — each handle ships with M4 × 25 mm screws that suit
18–21 mm boards; for thicker panels, request longer screws (rule of thumb: screw length
≈ board thickness + ~4 mm, so 25 mm board → 30 mm, 30 → 35, 35 → 40). As a rule of thumb:
50–80 mm suits drawers and small cabinets; 110–185 mm suits cabinet doors and wide
drawers; 220–400 mm suits larger cabinet doors and long drawer runs. All sizes are for
cabinetry — not full-size entrance or appliance doors.
Size (length × hole spacing × bar × weight)
| Overall length (mm) | Hole spacing CC (mm) | Bar section W × H (mm) | Projection (mm) | Weight (g) |
|---|---|---|---|---|
| 50 | 32 | 11.5 × 15 | 15 | 41 |
| 80 | 64 | 11.5 × 15 | 15 | 69 |
| 110 | 96 | 11.5 × 15 | 15 | 96 |
| 150 | 128 | 11.5 × 15 | 15 | 129 |
| 185 | 160 | 11.5 × 15 | 15 | 163 |
| 220 | 192 | 11.5 × 15 | 15 | 194 |
| 300 | 256 | 11.5 × 15 | 15 | 267 |
| 400 | 320 | 11.5 × 15 | 15 | 357 |
The 400 mm pull is available in brushed brass and antique bronze only
(no matte black).
Where they work
Kitchen cabinet doors · drawer fronts · wardrobe and closet doors · dresser and
sideboard drawers · vanities and TV cabinets · furniture restoration and upcycling
Specifications
Material: solid brass · Mounting: 2 × M4 tapped feet, machine screws from rear ·
Pilot holes: 4–5 mm drill · Finishes: brushed brass / matte black (electroplated) /
antique bronze · Lengths: 50–400 mm · Sold per piece · Hardware: 2 × M4 × 25 mm machine screws included per handle (one per foot)
Care
Wipe with a soft dry cloth; avoid abrasives and bathroom cleaners. Brushed brass
patina can be refreshed with brass polish at any time. Matte black and antique
finishes: dry cloth only, no polish.
Production & delivery
In-stock sizes ship from our workshop; door-to-door delivery with duties included
(DDP) to the US, typical transit 8–12 days.
Need a size that isn’t listed — or a larger quantity?
We cut brass to order. Get a
custom quote.
FAQ
- Do the handles come with screws? Yes — each handle ships with 2 × M4 × 25 mm machine screws (one per foot), sized for 18–21 mm boards; message us for thicker panels.
- One handle per order? Yes — orders are per piece; order 2 for a pair of
doors, 4+ for a kitchen run. - Will the brushed finish change colour? Yes, slowly — that is real
unlacquered brass. It can be polished back any time. - What drill bit do I need? 4–5 mm, two holes at the CC of your size.
Why Bespora
Small workshop, factory-direct pricing, no middlemen — the same solid brass we
supply to furniture makers, packed and shipped to your door.
