Description
Knurled Brass Hardware with a Quiet, Modern Edge
A single range that covers a whole kitchen or wardrobe: one round knob, one short T pull, and four bar pulls from compact drawer size to full-height door size. Every piece shares the same diamond knurling and turned collars, so the room reads as one scheme rather than a mix of fittings.
Solid Brass, Cut with a Diamond Knurl
Each handle starts as solid brass bar, machined to shape and then knurled with a diamond cutter that raises a fine cross-hatch across the grip area. The pattern is cut into the metal rather than stamped, so it stays crisp and does not smooth out with use.
A Grip That Actually Works
The knurled section is what your fingers close on. It gives a positive hold with wet or dry hands, which matters on kitchen cabinets, bathroom vanity doors and anything opened in a hurry. Because the texture sits flush with the bar, there is no ridge to catch a cloth or a sleeve.
Three Profile Families
The range is organised by opening size: a round knob for small doors and drawers, a 45 mm T pull for standard cabinet doors, and two-hole bar pulls for wide drawers and paired wardrobe doors. Finishes and knurling repeat across all three, so mixing them is the intended way to use the set.
The Round Knob — 25 mm
A 25 mm knurled disc on a short stem, standing 25 mm from the surface with a 10 mm base. It suits slim drawer fronts and small cupboard doors where a bar would look heavy, and mounts through a single hole.
The T Pull — 45 mm
A 45 mm knurled bar on one centred stem, 34 mm high with a 15 mm base and a 13 mm bar. It is the middle option between a knob and a bar pull: more to hold than a knob, less visual bulk than a long handle.
The Bar Pulls — 86 / 118 / 150 / 182 mm
Four lengths on two stems, all 34 mm high. Overall length and hole centres move together: 86 mm with 64 mm centres, 118 mm with 96 mm, 150 mm with 128 mm and 182 mm with 160 mm. Centre-to-centre spacing decides the fit, so measure your existing holes first.
Two Finishes: Natural Brass and Blackened Brass
Natural Brass keeps the warm, lightly brushed original tone, which suits walnut, oak and painted cream joinery. Blackened Brass takes the body to a deep near-black while the end caps and base rings stay bright brass, so the two-tone detail reads clearly against light doors without becoming a feature.
Dimensions at a Glance
| Profile | Size | Mounting | Hole centers (CTC) |
|---|---|---|---|
| Round knob | Face Ø 25 mm, height 25 mm, base Ø 10 mm | Single hole | — |
| T pull | Length 45 mm, bar Ø 13 mm, height 34 mm, base Ø 15 mm | Single hole | — |
| Bar pull | Length 86 mm, height 34 mm | Two holes | 64 mm |
| Bar pull | Length 118 mm, height 34 mm | Two holes | 96 mm |
| Bar pull | Length 150 mm, height 34 mm | Two holes | 128 mm |
| Bar pull | Length 182 mm, height 34 mm | Two holes | 160 mm |
How the Two-Tone Finish Is Built
On the blackened version the body is finished dark and the end caps and base rings are left in brass, then the whole piece is sealed. The contrast is deliberate and sits on the faces you see when the door is open as well as closed. Wipe it dry rather than scrubbing the transition line.
Easy Installation
The knob and the 45 mm T pull need one M5 × 25 mm screw through a standard door or drawer front. Bar pulls use two M5 × 25 mm screws at the stated centres. Mark both holes from the handle itself so the spacing matches, and tighten evenly so the bar sits parallel to the door edge.
Care & Longevity
Wipe with a soft dry cloth. The knurled section can hold dust, so brush along the pattern rather than across it. Avoid abrasive cleaners and metal polish; natural brass darkens gradually with handling, which is part of the finish rather than a fault.
What’s in the Box
One solid brass knob, T pull or bar pull in the selected size and finish, plus the matching mounting screws. Choose the size and finish from the options above to match the rest of your project.
Trade & Bulk Orders
Ordering for a project, a hotel fit-out or a workshop? Send us the quantity and finish you need and we will come back with bulk pricing. Ask about bulk pricing.
