Description
Description
The Bespora Studio Solid Brass Cabinet Knob is a single-hole pull for cabinets, wardrobes and drawers, finished in Natural Brass. Three minimalist shapes — Mushroom Dome, Flat Top and Stepped Flat Top — are offered in 25 mm and 30 mm diameters, each turned from a solid piece of brass and sealed with a protective glaze.
Why solid brass
Unlike plated or hollow hardware, every knob is machined from solid brass. You can feel it in the weight (25–88 g depending on size) and you can rely on it — there is no thin coating to chip or peel.
A finish that stays bright
Each knob is sealed with a protective glaze that resists oxidation, so the Natural Brass tone stays bright through daily handling. No lacquer that yellows, no bare brass that goes green.
How to choose your size
Pick by knob diameter — 25 mm for lighter drawers and smaller doors, 30 mm where you want more presence. Base and height are listed in the dimensions table below so you can check clearance before ordering. Each variation photo also shows its exact dimensions.
Dimensions
| Model | Shape | Diameter | Base Ø | Height | Weight |
|---|---|---|---|---|---|
| 3303 | Mushroom Dome | 25 mm | 14 mm | 28 mm | ~57 g |
| 3303-1 | Mushroom Dome | 30 mm | 17 mm | 31 mm | ~88 g |
| 3057-2 | Flat Top | 25 mm | 15 mm | 20 mm | ~25 g |
| 3057 | Flat Top | 30 mm | 15 mm | 21 mm | ~37 g |
| 3295-1 | Stepped Flat Top | 25 mm | 15 mm | 24 mm | ~43 g |
| 3295 | Stepped Flat Top | 30 mm | 18 mm | 26 mm | ~65 g |
Installation
Single-hole mount. Drill one 3–4 mm hole (or reuse the existing one), pass the supplied screw through from the back of your door or drawer front, and thread it into the knob. A Phillips screwdriver is all you need — most installs take a couple of minutes per knob. The screw supplied as standard suits 18–20 mm panels; if your panel is thinner or thicker, leave a note with the panel thickness at checkout and we will include a screw of the correct length.
What’s in the Box
Each order includes one knob and one mounting screw (standard length suits 18–20 mm door and drawer fronts). For panels outside 18–20 mm, note the thickness at checkout and we’ll supply a screw of the right length.
Specifications
Material: solid brass. Finish: Natural Brass, sealed with a protective glaze. Mount: single hole, one screw (fits 18–20 mm door/drawer fronts). Sizes: 25 mm and 30 mm diameter. Shapes: Mushroom Dome, Flat Top, Stepped Flat Top. Sold per piece.
Care
Wipe with a soft, dry or lightly damp cloth; avoid abrasive cleaners. The glaze-sealed finish is designed to hold its tone without regular polishing.
Where they work
Kitchen cabinets, bathroom vanities, wardrobe doors, desk and sideboard drawers, bookcases and furniture upgrades — anywhere a single-hole pull is used on an 18–20 mm panel.
Bulk orders
Need a larger quantity? Ask about bulk pricing.
FAQ
Are these solid brass? Yes — every knob is machined from solid brass, not plated.
What screw is included? One brass mounting screw is included, sized for 18–20 mm door and drawer fronts. If your panel is a different thickness, leave a note at checkout with the thickness and we’ll send a screw that fits.
Do you offer a brushed finish? Currently only Natural Brass is in stock.
Why Bespora
Bespora Studio designs minimalist solid-brass hardware for everyday furniture. Each piece is built to be felt as much as seen.
